Diaphragm valve with stainless steel pneumatic actuator
Inside and outside of body can be High-temperature sterilization
Size: DN15-50
Working pressure: 0-16bar
Working temperature: -10 degree~+180 degree
Material: Stainless steel 316L
Seal Material: EPDM+PTFE
Pneumatic actuator: Stainless steel 304
Control air pressure: 3-8bar
Driving way: Pneumatic, normally closed(1), normally open(2), and double direction(3)
Useful: Pneumatic actuator D applied to pass body, Pneumatic actuator T applied to pass body and multipass body
Max pressure: 10bar (diaphragm is EPDM or FPM),
6bar (diaphragm is PTFE, one side shall be used))
Max temperature: 150degree(According to the conditions of use)
Control pressure: 4-6 bar(control way 1), 3-4 bar(control way 2 and 3)
Diaphragm material: EPDM, FPM, PTFE
Body material: Stainless steel 316L
Connection way: Tri-clamp connections see below table:
Other connection way: Welding, flange, thread
Manufacturing standard: GB, DIN, ISO, SMS
| Technical Data |
| Material |
Contact with the product components |
Investment casting316L(1.4409) |
Can provide material inspection report |
| Materal no contact with the product components |
304(1.4301) |
| Sealing material |
Standard |
EPDM+PTFE |
Adopt sealing material with all the seal material the FDA 117.2600 |
| Option |
EPDM |
| Pressure |
Pressure of work |
16 bar |
| Control air pressure |
5-8 bar |
| Temperature |
Working temperature |
EPDM(-40 ~+130 degree), EPDM+PTFE(-5~+160degree) |
| Surface treatment |
Inside surface treatment |
Ra≥0.4-0.8μm |
|
| Surface treatment |
Sand blasket |
|
| Connection |
The diameter welding |
DIN11850-2,DIN11850-1,3A,SMS,ISO,IDF,BS,BPE.... |
| Connection mode: |
weld, triclamp,flange,wled socket,screw etc |
| Body mode |
Straight ,T type, U type, L type,Multi type can be chosen |
| Optional driven |
Brainpower |
| Pneumatic control |
Pleastic actuator and stainless steel actuator |
| Manual handle mode |
ABS or stainless steel handle |
Audited Supplier 
){kind=link}
){kind=link}