Sanitary stainless steel plate heat exchanger
1. Materil: SS304 & SS316L
2. Function: Heating or Cooling, Pasteurization
This heat exchanger is fluid flow; fluid steam carries on the heat change the ideal equipment. It has the heat transfer efficiency high, the heat los young, the structure compact dexterous, the area young, the installment clean convenient, the application widespread, the service life is long and so on the characteristic. In the same pressure loss situation, its heat transfer coefficient tubular heat exchanger is higher than 3-5 time, the area for the tubular heat exchanger 1/3, the heat recovery rate may reach as high as above 90%. The plate heat interchanger widely applies on metallurgy, petroleum, chemical industry, food, drugs manufacture, ships, spinning and weaving, papermaking.
Application
Pasteurization
Normal cooling and heating in such industries as dairy, brewage, beverage, food etc.
Heating and cooling in pharmaceutical industry.
Front Plate
The front plate is used for meeting higher requirements in food processing. The combination of the high pressure depth, plate type and relatively few contacts make the running time longer and there will be no interruption. The diverging type can ensure that the liquid flows the whole plate. The end diameter enables it to carry out CIP cleaning with the same fluid it uses during the use.
Working principle
The plate type heat excharger is composed of a group of corrugated materal plants. The holes on it from channel for liquids to flow, and the heat will be transferred between two kinds of liquids.
The plates are assembled between a fixed frame board and a moveable clamping board and are tighted by the bolts.
These plates are installed with sealing gaskets. The sealing gaskets play the sealing function on the channels between plates and make the liquids flow into adjacent channels. The quantity of plates are determined by flow , physical properties and temperature of liquids.The joints can be located on the frame board and clamping board.
Standard Materials
The frame and clamping board can be subjected to painting on the surace or coated by stainless steel. The movable nut on the fasening bolt is made of carbon steel and stainless steel.
Plate type BR0.06, 0.13, 0.22, 0.3 ,0.5, 0.65 plate stainless steel AISI316L, 316, 304
Sealing gasket type
NBR or EPDM
Technical date
Mechanical desinged pressure temperature
Designed pressure 1.0Mpa
Working pressure 0.6Mpa
Working tempresure:-10 degree -+150 degree
Joint type
3A, DIN SMS, ISO, Male thread, TC clamp , Union, Flange or others can be supplied according to requirements.
Technical Parameters
| Specification Model |
Area |
Caliber |
| BR-0.06 |
1-4m2 |
1 1/4"/DN25/32mm |
| BR-0.13 |
3-15m2 |
1.5"/DN50/38mm |
| BR-0.22 |
6-30m2 |
2"/DN80/51mm |
| BR-0.3 |
10-40m2 |
2"/DN100/51mm |
| BR-0.35 |
15-40m2 |
2"/DN65/51mm |
| BR-0.5 |
20-60m2 |
2"/DN150/51mm |
| Please feel free to contact us if you have any questions. |
Audited Supplier 
){kind=link}
){kind=link}